As it turns out, albeit I don’t do voice as my career focus, I decided to help out a team member and took ownership of an issue that came up. It was a phone that wasn’t working, one that was attached to an ATA 190. After I tracked down the device I typed it’s IP address into my web browser and found it in a Recovery Firmware state. What us traditional Cisco route/switch guys would consider “ROMMON” as a loose equivalent. In this case it is important to note, since the device wasn’t function on proper firmware and was in recovery mode, the IP address of the ATA is actually in the Data VLAN at this point, NOT the Voice VLAN.
Tag: Register
ATA 190 Recovery Firmware Page – ATA 190 Will Not Register
Reading Time: 3 minutes
Permanent link to this article: https://www.packetpilot.com/ata-190-recovery-firmware-page-ata-190-will-not-register/